Atag HG62 B Serie Manuel D'utilisation page 63

INSTALLATION INSTRUCTIONS
Space to be left free around the appliance
A hob generates heat. Leave sufficient distance between the appliance
and any non heat-resistant materials. Be cautious with materials that
may discolour (such as stainless steel).
min. 100 mm
Caution!
• The bottom of the hob becomes hot. Do not place combustible items
in a drawer if the drawer is fitted directly below the hob.
Install appliance and make connections
1. Place the appliance in the worktop and secure it using the mounting
brackets and screws supplied.
2. Connect to the gas supply.
3. Verify that there are no gas leaks using water and washing-up liquid
at the gas connections.
4. Connect the appliance to electricity mains.
min. 600 mm (HG42/HG62)
min. 750 mm (HG77)
min. 900 mm (HG92/97)
min. 100 mm
EN 31