Safety Instructions - Atag HG62 B Serie Manuel D'utilisation

Plaque de cuisson à gaz
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

YOUR GAS HOB

Safety instructions

EN 6
What you should pay attention to
• Ensure that there is adequate ventilation during use.
Keep natural ventilation openings open.
When using the hob for long periods, extra ventilation is necessary.
Open a window for instance or install a mechanical fan.
• Use the hob only for preparing dishes.
The appliance is not suitable for space heating.
• Never flambé under an extractor hood.
The high flames can cause a fire, even if the fan is switched off.
• The burner parts are hot during and immediately after use.
Do not touch them, and avoid contact with non-heat-resistant
materials.
Never immerse hot burner parts in cold water. The rapid cooling can
damage the enamel.
• The distance from the pan to a knob or non-heat-resistant wall
should always be greater than two centimetres.
In case of smaller distances the high temperature may cause the
knobs or wall to discolour and/or distort.
• Always use the pan supports and suitable cooking utensils.
Always place the pan on the pan support. Placing the pan directly
on the burner head can result in dangerous situations.
Aluminium trays or foil are not suitable as cooking utensils. They
can become burnt into the burners and pan supports.
• Installing burner parts and pan supports.
The hob can only function effectively if the burner parts have been
assembled using the guide ridges.
Ensure that the pan supports lie properly against each other and flat
on the drip tray. Only then can the pans be positioned stably.

Publicité

Table des Matières
loading

Table des Matières