Servicing And Maintenance; Checking The Safety Guards; Labelling, Information Signs - Hettich InnoFit 400 Instructions De Service Et De Montage

9. Servicing and maintenance

Maintenance intervals:
Work to be performed
Retighten screw connections
Clean off any oil, grease and dirt adhering to
the drawer assembly jig
Visually check tolerance plates for damage
Visually check the pins in the stops for
damage
Warning
Risk of injury!
Servicing and maintenance work must only be
carried out by instructed, qualified personnel.

9.1 Checking the safety guards

Regularly check safety guards to make sure they are complete
and in proper working order.
• Check safety guards for proper working order every day.
9.2 Labelling / information signs
Labelling/information signs must be
• cleaned with a cloth,
•
checked for secure attachment and legibility
•
replaced if they are damaged.
26
Interval
half yearly
half yearly
half yearly
half yearly