Safety Advice For Operating The Machine; Safety Advice For Carrying Out Maintenance Work - Hettich InnoFit 400 Instructions De Service Et De Montage

3. Safety
Requirements on operators
The operator must organise the work environment so as to permit
optimum, continuous production.
The operator must receive instruction before commencing work
for the first time and annually thereafter.
Prior to commencing work, all persons working on or at the sys-
tem shall undertake to
• follow the basic regulations on health and safety at work
and on accident prevention,
• wear personal / workplace related protective clothing and
equipment for the purpose of ensuring work safety and use
such while working if they are necessary for safety reasons.
Work must only performed for which authorisation has been
given.
For example:
• Work on pneumatic equipment must only be carried out by
a specialist specifically trained to do so or by instructed per-
sons under the direction and supervision of such a specialist
in accordance with the applicable technical regulations.

3.8 Safety advice for operating the machine

• The machine must only be put into operation in a fully ins-
talled and operational state.
• The machine must only be operated if all safety guards and
safety related equipment e.g.
- protective panelling,
are in working order and undamaged.
• On putting the system into operation, the operator must
make sure that all safety equipment and protective guards
as well as the controls are in correct working order and free
of damage.
• The workplace environment must be kept clean and tidy at
all times. This must be ensured by internal checks.
• Immediately report any irregularities or malfunctions to the
department / person responsible.
If necessary, the machine must be shut down immediately
and made safe.

3.9 Safety advice for carrying out maintenance work

• Maintenance work must only be performed by the
manufacturer's skilled personnel or under the manufacturer's
supervision.
• If the machine is completely shut down for servicing and
repair work, it must be prevented from switching back on
unexpectedly.
• If necessary, please cordon off maintenance zone, providing a
wide safety margin!
• Attach a warning sign.
• For maintenance measures use tools that are appropriate for
the work involved.
• Servicing and repair work must only be carried out by the
owner's skilled personnel.
• If safety devices need removing for servicing and repair work,
they must be refitted and checked as soon as the work has
been completed.
• Always tighten screw connections that have come loose
during servicing and repair work.
• At the start of work, connections and screw connectors must
be cleaned of oil, operating consumables and dirt.
• Make sure operating consumables and auxiliary substances
as well as replaced parts are disposed of safely and in an
environment-friendly manner.
11