Restoring The Delivery State - Siemens SIMATIC IPC647D Instructions De Service

9.8

Restoring the delivery state

Supplement to sections 7.6.6 and 7.6.7 of the operating instructions.
Extended options of the Restore DVD of Windows 10 and Windows Server 2016
Remarque
Set the desired boot mode in BIOS Setup.
We recommend that you restore Windows 10 and Windows Server 2016 in UEFI mode.
Restoring boot modes
You can restore Windows 10 Enterprise 2016 LTSB and Windows Server 2016 in the
following two boot modes.
● UEFI mode (GPT volume):
To support new features, such as TPM 2.0, Secure Boot and volumes larger than 2 TB,
the operating system must be restored in the way that it boots in UEFI mode. To do this,
the Restore DVD must be booted in UEFI mode.
The target system is then set up with a GPT volume and boots in UEFI mode.
● Legacy mode (MBR volume):
To support extensions and functions, such as older PCI(e) cards and older software
products, the operating system must be restored to boot in Legacy mode. To do this, the
Restore DVD must be booted in Legacy mode.
The target system is then set up with an MBR volume and boots in Legacy mode.
Selection of the restore scope
You can select the restore scope of Windows 10 Enterprise 2015 LTSB and Windows 10
Enterprise 2016 LTSB
● "Factory settings" option:
Use this option if you want to restore the factory settings of the operating system with the
installed device drivers and the SIEMENS software products.
● "Administrator Basic" option:
Use this option if you only want to restore the operating system without additional device
drivers and without SIEMENS software products.
SIMATIC IPC647D
Instructions de service, 03/2018, A5E32996307-AC
IMPORTANT: Updated information for IPC647D
9.8 Restoring the delivery state
251