Installation Instructions And Commissioning; Installation; Commissioning - Tecno-gaz Tecno Seal Mode D'emploi

2.3

Installation instructions and commissioning

Prior to installation, read the safety notices in chapter 1.4

2.3.1 Installation

Place the machine on a horizontal surface.

Please do not lift the machine by the in feed section.

The distance from the machine to a wall must be at least 200 mm.
200mm

2.3.2 Commissioning

To switch on the machine, press the power switch on the left-hand side.
After a short self-test and after the selected sealing temperature has been reached, the
machine is operational.
Page GB 9

Power switch
9.693.004

V 4.06