Important Notice - Tecno-gaz Tecno Seal Mode D'emploi

1.3

Important notice

In accordance with the intended use, the CE marking is displayed based on
the following EU directives:
2006/42/CE, 2006/95CE and 2004/108/CE.
Medical machine directive 93/42/CE is not applicable to sealing machines.
The limit values of IEC 60601-1 may not be applied in repeated electrical
inspections.
The manufacturer accepts no liability whatsoever for damage caused by tests
in accordance with standards not listed in the Conformity Declaration.
In the event of conversion work or interventions to the machine undertaken
without the express written permission of the manufacturer, the warranty
shall be deemed void and any liability for physical or material damage shall
be transferred to the operator.
Page GB 4 9.693.004 V 4.06