Distributors; Distributor For 2 Heating Circuits - meibes Victaulic 66457.0 Documentation Technique Pour Le Montage Et La Mise En Service

4. Distributors

The distributors consist of two stacked chambers with thermal separation of the supply and return lines. The boiler circuit is both connectable
on the left and right hand side. All connections are prepared so that Victaulic clamps can be used. The top outlets for connecting the heating
circuits are designed with Victaulic groove in the nominal width DN 50 (Ø 60.3 mm). All distributors are painted, pressure tested, fully insula-
ted and supplied with two height adjustable feet. Furthermore, 2 Victaulic couplings and 2 end caps are supplied with a 1/2" drill hole as well
as insulation for the Victaulic clamps.
The holes are sealed with plugs. Alternatively, a KFE-cock can be screwed on for emptying. The distributor system consists of elements for
two or three heating circuits, which can be combined as desired, depending on the axis-centre distance.
max. permissible pressure rating:
max. permissible temperature:
4.1 Distributors for 2 heating circuits
Pump volume
Art. no.
up to
66457.0 12 m /h
3
66457.2 30 m /h
3
66457.4 50 m /h
3
66457.6 100 m /h
3
* at ΔT = 20 K
Effiziente Energietechnik
PN 10
110 °C
Power output Ø pipe (AD)
up to* in mm
280 kW 114,3
700 kW 168,3
1150 kW 168,3
2300 kW 219,1
Installation length 1135 mm
250 mm
Height (H) for
H (min.)
a in mm
in mm
guide in mm
170 580
230 760
230 850
230 850
Axis –Centre
the boiler distance
(AA) in mm
680 225
860 340
1005 450
1005 450
32