Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Contents
1.
2.
3.
4.
4.1
4.2
Distributor for 3 heating circuits
4.3
5.
6.
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
7.
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
8.
Effiziente Energietechnik
Safety notes
28
Safety notes
Read these instructions carefully before assembling.
29
The assembly and commissioning of the entire unit
may only be carried out by an authorised specialist.
29
Before starting work, familiarise yourself with all parts and their
operation. In order to prevent accidents and damage to people and
31
property, please follow these safety instructions closely
31
Meibes - large distributor - modular system
The assembly location must be frost-proof and easily accessible. In
32
order to ensure that the system is well positioned, the floor must be
flat with the feet firmly anchored into it.
33
The erection site/area must meet the regional and local fire
safety requirements.
33
35
Regulations / Directives
Observe the applicable accident prevention regulations, environ-
35
mental legislation and statutory rules for the assembly, installation
and operation. Furthermore, follow the relevant DIN, EN, DVGW, VDI
36
and VDE (incl. lightning protection) directives and all of the current
national standards, laws and directives which apply.
37
Before commissioning
38
Check the product for completeness. Immediately make a note
of transport damage and other grounds for complaint and before
39
assembly, inform our office!
The result of the initial commissioning should be recorded
40
in a log. In the case of non-compliance, claims cannot be made for
damages or malfunctions that have arisen under the warranty
41
that is provided by Meibes.
41
42
43
43
45
46
48
49
49
51
52
52
- Read the assembly instructions before
use
- Risk of cuts
- Risk of being crushing
- Risk of increased temperature
- Risk of electrical voltage
- Risk of items falling during installation
28
Publicité
Chapitres
Table des Matières
