Description Of The Victaulic; General Product Information - meibes Victaulic 66457.0 Documentation Technique Pour Le Montage Et La Mise En Service

2. Description of the Victaulic

Victaulic connection technology has been a well known system for a long time. Up until now, it has mainly been used in plant engineering. It is
characterised by its quick and easy assembly.
After assembly, the Victaulic coupling catches the beading found inside the pipe. The pressure-reacting C-shaped seal fi ts the standard roll or
mill-grooved pipe. All of the supplied couplings contain a seal which is approved for hot water systems (up to 110 °C). Always read the assem-
bly instructions before assembling the Victaulic couplings and accessories. The installation manual is available from Victaulic, or online at
www.victaulic.com.

3. General product information

The product
The entire system consists of the following:

Distributors for 2 or 3 heating circuits - can be combined as desired

Angle connection 90 ° in the case of lack of space

Preassembled pump groups DN 25 to DN 65 with a large selection of pumps

For pump capacities of up to 100 m

In the boiler guard option = air separator, dirt trap, hydraulic diverter
Benefi ts for you

Short assembly times and the rapid exchanging of distributor systems

Simple calculation

Simple planning = less risk and greater yield
Effiziente Energietechnik
/h and a power output of up to 2300 kW
3
Highly accentuated for easier
comprehension
30