JAC VARIA SELF 1000 Notice D'utilisation Originale page 12

Open the door (fig.1, n°10) using the lock (fig.1, n°9).
Remove the crumb tray (fig.1, n°8).
Replace the blade (fig.7):
A. Unscrew the two spanners located on the left-hand side of the machine (fig.7 n°25)
B. Remove the blade guard (fig.1, n°6) by means of the Allen screws.
C. Unscrew the nut that secures the blade (fig.7, n°26) using the two spanners (fig.7, n°25).
D. Remove the spacer and replace the blade, taking care to position it correctly on the locator
pins. Replace the spacer.
E. Fit and tighten the new nut supplied with your new blade to lock the blade, using the
spanners supplied. It is important that the new nut be fitted in order to provide optimum tightening.
Refit the crumb tray and close the door.
Connect your machine to the mains supply; it is now ready.
Check that your approved agent has recorded his work in your service booklet in order to maintain
your 5-year warranty cover.
Please note that your blade can be sharpened; contact your approved agent for further information.
9 CONSUMABLES
When ordering spare parts, check with your approved agent which part is required based on the
spare parts catalogue issued by the manufacturer.
Always quote the machine serial number shown on the nameplate.
Your agent will place the orders with JAC.
9.1 List of CONSUMABLES
ITEM CODE
BVSLT017
7240038
BVSLA030
7240042
English
DESCRIPTION
COVER ROLLER
MOTOR BELT
CIRCULAR BLADE, Ø 420 MM
LINEAR GUIDE BELT
MODEL
ALL
ALL
ALL
ALL
12