JAC VARIA SELF 1000 Notice D'utilisation Originale page 11

7 OPERATION
Braked castors must be locked while the machine is in operation (fig.1, n°7).
Switch on the power to the machine at the start of the day using the main isolator switch
(fig.2, n°12).
Operating procedure (fig.4,5)
A. Open the cover (fig.4, n°1).
B. Place the loaf on the infeed table.
C. Take care to position the loaf correctly in the right-hand corner towards the front of the machine.
D. Close the cover.
E. Select the desired thickness from the 3 slice thicknesses available, by pressing the relevant button
(thin, medium or thick). Loaf slicing will start.
F. When the green button flashes, open the cover to extract the sliced loaf (fig.6, n°8) from the
outfeed table (fig.3, n°15) and bag it on the bagger (fig.1, n°3).
8 MAINTENANCE
8.1 Daily, by a trained operator.
A. Check whether you need to empty the crumb tray (fig.1, n°8) (NB: don't forget to lock the door
with the key).
B.
C. Clean the tables (fig.3, n°15, 17) using a brush.
D. Clean the optical sensor (fig.3, n°30).
E. Clean the cover window (fig.1, n°1) by placing it in the cleaning position (fig.11).
F. Use a dry cloth to clean the inside.
G. Use a damp cloth to clean the outside.
H. Activate cleaning mode:
With a mechanical keyboard, press the red and green buttons at the same time.
With a touch screen, press the "brush" symbol in the top right-hand corner.
8.2 Annually, by an approved agent.
A. Remove the plug from the socket (fig.2, n°13).
B. Check the condition of the cutting blade (fig.1, n°2).
C. If you notice a deterioration in cutting quality, the cutting blade must be replaced (JAC part
number: BVSLA030 in the JAC Spare Parts catalogue).
D. If the blade needs to be replaced, do so in accordance with the blade replacement procedure
(fig.9).
E. Clean with a brush and vacuum the inside of the machine.
Check that your approved agent has recorded his work in your service booklet in order to maintain
your 5-year warranty cover.
8.3 Blade replacement.
(fig.7)
Always wear cut-resistant gloves (EN 388:2003 version B= 5) and safety footwear when replacing the
blade or when working in the vicinity of the blade.
Having ensured that the plug on your machine (fig.2, n°13) has been disconnected from the mains:
11
English