Promax PROLITE-75 Mode D'emploi page 62

To move between editable fields you should press the softkey PREV [F4]
(previous field) or NEXT [F5] (next field).
Once on the field, to edit a value you should use arrow keys
alphanumeric keypad [13].
Fields displayed on the screen are:
THRESHOLD:
NAME:
WAVELENGHT:
LOW:
HIGH:
At the bottom of the screen, the soft keys provide access to the next options:
BACK [F1]:
PREV [F4]:
NEXT [F5]:
4.2.2.5 LOGGER function
LOGGER function performs data acquisitions and stores them on the instrument.
Later you can view or print those data.
Page 22
Figure 12.- THRESHOLD function.
Its a numeric value that identifies a set of threshold values.
It is the name that defines a set of threshold values.
It indicates the wavelength to which will be applied the
threshold values shown on the screen.
It defines the minimum threshold for a given wavelength.
It defines the maximum threshold for a given wavelength.
It returns to the GPON METER screen (see 4.2.2).
It goes to the previous editable field.
It goes to the next editable field.
USER'S MANUAL. PROLITE-75
[11] or the
04-2009