Remote Control Function - Leggett & Platt Premier premium MODELS Mode D'emploi

UNDERBED LIGHT DECREASE BUTTON (+)
Press and hold the decrease
button until light goes off. Press
and release to decrease brightness
incrementally.
HEAD MASSAGE BUTTON
The head massage has 3 levels of
intensity. Press and release once for
low intensity; press and release a
second time for medium intensity;
press and release a third time for
high intensity. Press and release a
fourth time to turn the massage off.
PILLOW TILT DOWN BUTTON (-)
Press and hold to lower the pillow
tilt section of the base.
HEAD DOWN BUTTON (-)
Press and hold to lower the head
section of the base.
FOOT DOWN BUTTON (-)
Press and hold to lower the foot
section of the base.
Press and hold to adjust base to the
preprogrammed TV position.
*To program a position, adjust base
to desired position, press and hold
the Set I button for 5 seconds, then
Press and hold to lower the base to
the level position.
BLUE TOOTH ENABLED TECHNOLOGY
The Premier Series™ Adjustable Base can be operated from your personal device through the Leggett & Platt
app. To download the app:
1. Go to either the Google Play store for Android devices or the Apple Store for iOS devices.
2. Search for the Leggett & Platt Premier Series™ app.
3. Download the app to your personal device.
4. Tap the app and enter the passcode 4321.
5. Pair your base to your personal device and you are ready to operate your base through the app.
22
Premier Series Owners Manual 99301588-b
™

REMOTE CONTROL FUNCTION

SET I BUTTON
release.
FLAT BUTTON
UNDERBED LIGHT ON BUTTON
Press in the center of the button to
turn underbed light on at medium
brightness.
UNDERBED LIGHT INCREASE BUTTON (+)
Press and hold the increase button
to go to maximum brightness. Press
and release to increase brightness
incrementally.
PILLOW TILT UP BUTTON (+)
Press and hold to raise the pillow tilt
section of the base.
HEAD UP BUTTON (+)
Press and hold to raise the head
section of the base.
FOOT UP BUTTON (+)
Press and hold to raise the foot
section of the base.
FOOT MASSAGE BUTTON
The foot massage has 3 levels of
intensity. Press and release once for
low intensity; press and release a
second time for medium intensity;
press and release a third time for
high intensity. Preass and release a
fourth time to turn the massage off.
SET II BUTTON
Press and hold to adjust base to the
preprogrammed sleep position.
*To program a position, adjust base
to desired position, press and hold
the Set II button for 5 seconds, then
release.