Leggett & Platt Premier premium MODELS Mode D'emploi page 11

STEP 4
Remove and extend out power cord from the protective packaging. Plug
power cord into power supply (FIGURE 8). Note: Do NOT plug power
supply into working, grounded electrical power outlet yet.
FIGURE 8
POWER CORD
WARNING
POWER CORDS MUST NOT INTERFERE WITH
ANY ADJUSTABLE BASE MECHANISMS.
STEP 5
Carefully rotate the adjustable base over so it is resting on its legs
(FIGURE 9).
FIGURE 9
INSTALLATION
POWER SUPPLY
IF YOU ARE SETTING UP A KING SIZE
BASE (TWO TXL BASES TANDEM SYNCED
TOGETHER), SYNC BASES PRIOR TO
ROTATING BASES TOP-SIDE-UP. SEE THE
REMOTE PROGRAMMING SECTION OF THIS
MANUAL FOR THE PROCEDURE.
! IMPORTANT !
Premier Series Owners Manual 99301588-b
™
11