Leggett & Platt Premier premium MODELS Mode D'emploi page 14

HEADBOARD BRACKET INSTALLATION
FAILURE TO FOLLOW HEADBOARD BRACKET
INSTALLATION INSTRUCTIONS MAY CAUSE
HEADBOARD BRACKET INTERFERENCE
WITH BASE FOAM DURING BASE
OPERATION. BASE FOAM OR BASE COVER
DAMAGE COULD RESULT.
WARNING
IN ORDER TO AVOID A PERSON OR PET BEING
CAUGHT IN THE SPACE REFERENCED BELOW
WHILE THE BASE IS IN MOTION, THE BOTTOM
OF THE HEADBOARD CROSS MEMBER MUST
BE POSITIONED SO THAT THERE IS NO
MORE THAN 3 INCHES (76.2mm) BETWEEN
THE HEADBOARD AND THE TOP OF THE
MATTRESS (FIGURE 12). DO NOT EXCEED 3
INCHES (76.2mm). FAILURE TO FOLLOW THIS
INSTRUCTION COULD RESULT IN SERIOUS
PERSONAL INJURY OR DEATH.
FIGURE 12
14
Premier Series Owners Manual 99301588-b
™
INSTALLATION
NOTE