Publicité
Les langues disponibles
Les langues disponibles
7 Ensure shoulder rest pommel handles are positioned
to the outside of the shoulder rest frames.
9 Insert 1/4"-20 x 1-1/4" screws through washers
and into top of screw holes.
10 Use the 1/8" Allen key provided to tighten,
ensuring the shoulder rests are secure.
11 To determine correct length of ropes, set carriage
stopper in second hole from footbar. Engage spring
(6) in gearbar (5) so carriage (16) does not move.
8 Place 1/4" black washers over the shoulder rests
screw hole slots.
12 Place double loop straps [19] on carriage so
D-rings on straps line up with back of metal plate
of shoulder rests.
Subtle adjustments can be made to length of
ropes by sliding chrome tubes [27]. Secure by
tightening star knobs [21].
7
Publicité
