Télécharger Imprimer la page

PROTEOR MATIK Notice D'utilisation page 11

Genou

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
The knee has been designed for patients with a maximum weight of 125 kg (including carried load).
The warranty does not cover damage or degradation caused by misuse, unsuitable alignment, use without suitable protection in
a very dusty environment or any other inappropriate use.
The knee must not be exposed to environments which might induce corrosion of the metal components (fresh water, sea water,
chlorinated water, acids, etc.).
Showering or taking a bath while wearing the prosthesis is prohibited; this might impair its properties and its correct operation.
Never leave this device near a source of heat since it might burn or release toxic fumes.
The use of solvents is prohibited.
C. Side effects
There are no side effects directly associated with the device.
Any serious incident that occurs which relates to the device must be reported to the manufacturer and to the competent authority of
the member state in which the incident occurred.
9. MAINTENANCE, STORAGE, DISPOSAL AND SERVICE LIFE
A. Maintenance/cleaning
You can clean the knee using a damp sponge
Do not immerse the knee or hold it under running water
Dry you knee immediately if it is exposed to bad weather or accidental splashing.
The stops may need to be replaced:
Spare stop: EE014 (2 are required)
B. Storage
Service and storage temperature: -10°C to +40°C
Relative humidity of the air: no restrictions
C. Disposal
The various components of this device are considered as special waste: elastomer, plastic, aluminium, titanium, steel and brass. They
must be treated in accordance with current, applicable legislation.
D. Service life
It is advisable to arrange for a prosthetist/orthotist to check the product once a year.
10. DESCRIPTION OF THE SYMBOLS
Manufacturer
11. REGULATORY INFORMATION
This product is a CE-marked medical device that is certified as conforming with regulation (EU) 2017/745
12. NAME AND ADDRESS OF MANUFACTURER
PROTEOR SAS
6 rue de la Redoute – 21850 Saint-Apollinaire – France
Tel.: +33 3 80 78 42 42 – Fax: +33 3 80 78 42 15
cs@proteor.com – www.proteor.com
INSTRUCTIONS FOR USE
Identified risk
CE marking and year of first declaration of
conformity
Page 5 of 5

Publicité

loading

Ce manuel est également adapté pour:

1p2001p200-kd