AIR-FLOW
®
POWDER CHAMBER
Check the condition of the threads on the powder chamber, on the cap and on the O-ring seals.
Please refer to the information provided in the chapter "Maintenance".
Make sure that the powder chambers are absolutely dry. Moisture can cause the powder to cake
and provoke a blocking of the circuit.
into the AIR-FLOW CLASSIC+SOFT powder chamber. The AIR-FLOW PERIO+PLUS powder chamber
having a different design follow the instructions as shown above.
28
CLASSIC+SOFT
AIR-FLOW
POWDER CHAMBER
PERIO+PLUS
®