Zodiac BARACUDA G4 Guide Du Propriétaire page 4

Page 4
ENGLISH
Installation
Prepare the Pool
1. Manually vacuum the pool if excessive debris in present,
and make sure the pool filter and pump basket are clean.
2. Close the pool main drain line.
3. Adjust the return lines to blow down-
ward to break up surface circulation and
ensure complete cleaning coverage.
• Loosen the fitting lock ring
• Redirect the eyeball downward
• Retighten the lock
If the return fitting cannot be adjusted, the
fitting MUST be replaced with Zodiac return line
diverter (part #W90155 for 2 in. or #W24100 for pools
without return fittings) .
Assemble the Cleaner
Stretch the dual durometer disc over the
foot pad with the fins pointing up. The disc
should fit securely in the groves and
rotate freely on the pad.
Assemble the Hose
For corner or end installations, connect enough
hose to reach the farthest point of the pool and
then add one more section.
Skimmer or
Dedicated Suction
Cleaner Line
Position the hose weight 1,5 m (5 ft.) from the end of the hose that will connect to the cleaner.
® ®
Zodiac Baracuda G4 Automatic Aboveground Pool Cleaner
For center installations, connect enough hose to
reach the farthest point of the pool and then add
two more sections.
1 Hose
Section
First
First
Hose
Hose
Section
Section
|
Owner's Manual
Stretch
Skimmer or
Dedicated Suction
Cleaner Line
2 Hose
Sections