Eurosystems MFL 03 Manuel D'utilisation page 24

3. DEFINITION OF PICTOGRAMS
START
STOP
Accelerator command. In the START
position, the air is open; while, in the
STOP position, the motor is off.
LEFT – the lever under the handlebar
activates the forward movement of the
wheels.
RIGHT – the lever moved upward acti-
vates the equipment.
CAUTION – read the manual.
CAUTION – moving parts.
CAUTION – cutting bar.
Keep hands away from the blades.
Cutting bar cleaning and maintenance.
4. TECHNICAL FEATURES
GROSS and NET
CE declaration label
weight
on the last page
Rated power
Blade dimensions 870 mm
Width 870 mm
Length
1120 mm
Height 1080 mm
Wheels 13x5.00-6
Maximum forward
2.5 km/h
speed
Sound power
CE declaration label
Acoustic pressure
on the last page
Vibrations
5. HANDLING AND PACKAGING
2 or more people are required to handle
packaging, using the handles on the card-
board box. The GROSS weight is indicated
in the "TECHNICAL FEATURES" chapter.
CAUTION!
Do not overturn or roll the machine. Pos-
sible damage to bonnets and mechani-
cal parts.
INFORMATION!
If more than one machine or interchange-
able equipment is supplied on pallets,
unload without dropping them on the
ground. Use a forklift if necessary.
6. UNPACKING/ASSEMBLY
1.4 1.4
1. 1 1. 1 1. 2 1. 2 1. 3 1. 3
1. 7 1. 7 1. 8 1. 8
1. 6 1. 6
DANGER!
Always leave the blade guard mounted
and use resistant gloves when handling
the bar [G] .
1.1 1.1
1. 9 1. 9 1.10 1.10 1.11 1.11 1.12 1.12
DANGER!
Both springs must be correctly engaged
for the brake system to function properly.
DANGER!
If one or both springs break, replace
them before using the machine.
1.14 1.14 1.15 1.15 1.16 1.16
CAUTION!
The motor is supplied without lubricat-
ing oil. For information on the type of oil
and quantities to be used, refer to the
motor manual contained in the accesso-
ry bag [E].
CAUTION!
Add lubricating oil to the motor before
first start-up. For information on the
type of oil and quantities to be used, re-
fer to the motor manual contained in the
accessory bag [E].
CAUTION!
Before starting the machine, check the
oil level inside the motor, as indicated in
the specific user's manual
DANGER!
Before proceeding, read and understand
the chapter "SAFETY INSTRUCTIONS"
in its entirety.
DANGER!
Check correct functioning of the levers
before using the machine. See the "CA-
BLE ADJUSTMENT" paragraph to make
adjustments.
7.1 TANK FILLING
DANGER!
Use caution when handling flammable
fluids. Fuel is highly flammable and ex-
plosive.
DANGER!
Do not fill the tank in closed or poorly
1. 5 1. 5
ventilated environments.
DANGER!
Before refilling the tank, switch off the
machine and wait until the motor has
cooled down (15-20 min).
DANGER!
Do not smoke
1.13 1.13
ic devices near combustible fluids.
DANGER!
Use suitable, undamaged filling devices
such as fuel cans, funnels, etc.
DANGER!
In case of fuel leakage, move the ma-
chine before starting it up.
DANGER!
When filling operations have been com-
1. 1 1. 1
7. USE
1. 1 1. 1
.
or use electron-