Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
16
5.5
FLASHING INSTALLATION
EN
A.
With the fl ashing close to its fi nal position, assemble sides as illustrated using the supplied fasteners.
B.
The fl ashing position on the insert is adjustable, allowing for varying fi replace cavity and/or hearth
depths. Engage the tabs on the assembled side fl ashings into the appropriate slots on the insert for
the desired fi nal location.
C.
Adjust the blower chute tightly against the fl ashing and secure it in place.
D.
Insert the top piece as illustrated, then bolt together using the screws, lock washers and weldnuts
provided.
E.
Slide the appliance back into position.
W415-1466 / 04.21.15
BLOWER
CHUTE
Publicité
Chapitres
Table des Matières
Dépannage
