Publicité
Les langues disponibles
Les langues disponibles
V 2.0
VIBRATION PRECAUTIONS
1. This tool vibrates during use. Repeated or long-term exposure to vibration may cause temporary or
permanent physical injury, particularly to the hands, arms and shoulders.
2. Anyone using vibrating tools regularly or for an extended period should first be examined by a doctor and
then have regular medical check ups to ensure medical problems are not being caused by or worsened
from tool use.
3. If you feel any medical symptoms related to vibrations (such as tingling, numbness, and white or blue
fingers), seek medical attention as soon as possible.
4. DO NOT use this tool if one of the following applies:
a. Pregnant
b. Impaired blood circulation to the hands
c. Past hand injuries
d. Nervous system disorders
e. Diabetes
f. Raynaud's Disease
5. Do not smoke while operating the tool. Nicotine reduces the blood flow to the hands and fingers, increasing
the risk of vibration-related injury.
6. Wear suitable gloves to reduce the effects of vibration.
7. Use the tool with the least amount of vibration, when there is a choice between different processes.
8. Do not use for extended periods. Take frequent breaks to when using this tool.
9. Let the tool do the work. Grip the tool as lightly as possible (while still keeping safe control of it).
10. To reduce vibrations, maintain the tool as explained in this manual. If abnormal vibrations occur, stop using
this tool immediately.
TOOL USE AND CARE
1. Use the correct tool for the job. Do not force a tool or attachment to do the work of a larger industrial tool.
Maximize tool performance and safety by using the tool for its intended task.
2. This tool was designed for a specific function. Do not modify or alter this tool or use it for an
unintended purpose.
3. Securely hold this tool using both hands, unless it is designed for single hand use. Using a tool with only
one hand can result in loss of control.
4. Maintain tools with care (see Maintenance).
5. Remove adjusting keys and wrenches from the tool before operation or connecting it to a power source. A
wrench or key that is left attached to a rotating part of the tool increases the risk of personal injury.
6. Avoid unintentional starts. Be sure that the throttle/ignition switch is in the neutral or OFF position when not
in use and before connecting it to any air source.
7. Do not carry the tool with fingers near or on the trigger/switch.
8
3 in. Air Cut Off Tool
For technical questions call: 1-800-665-8685
8344046
Publicité
