Lenze 8200 motec Instructions De Montage page 12

Setting tips
ƒ To avoid an early response in the case of forced ventilated motors, deactivate the
function, if necessary.
ƒ The current limits C0022 and C0023 only have an indirect effect on the I
calculation. However, you can prevent the motor from being actuated at the
maximum possible utilisation by the settings of C0022 and C0023.

Note!
If the controller is actuated at an increased rated power, the I
can respond if C0120 is set to a smaller value than 100 %.
12

2
t
2
t monitoring
EDK82MV752-BB DE/EN/FR 2.1