Lenze 8200 motec Instructions De Montage page 10

Codes for parameter setting
Code
No. Name
2
C0120 I t switch-off
C0311
Functions for
*
special
applications

2
(from
software
version 3.9)
10
Possible settings
Lenze Selection
0 0
= inactive
1
0 All functions switched off
1, 2, 4,  System manual
8, 16
1 128
Function active:
When the device is connected to
the mains, the thermal motor
load is initialised with 50 %.
The function has to be activated
for operation in UL-approved
systems.
{1 %}

IMPORTANT
200 Reference: apparent motor
current (C0054)
Reference to active motor
current (C0056) possible, see
C0310
A combination of functions
can be activated by entering
the sum of the selection
values.
Motor overload (I
value
Function switched-off:
When the device is connected
to the mains, the thermal
motor load is initialised with
0 % ("cold engine")
EDK82MV752-BB DE/EN/FR 2.1
2
xt) tart