Ivoclar Vivadent Cavifil Injector Mode D'emploi page 2

Ž

The direct application of the material into the cavity renders
transferring the material from syringe to spatula
unnecessary. The cavity can be filled from the bottom
without trapping air. There is no excess material to dispose
of. The Cavifil system helps to place restorations or sealings
economically and efficiently.
The contents of the Cavifils are normally enough for one
restoration or four sealings. The Cavifils have been
stipulated as a single-dose system. Restorations can be
placed economically. In addition, the risk of cross-
contamination is minimized.
Notes
– Apply the material at normal room temperature. Material
taken from the refrigerator may be difficult to extrude.
– Store Cavifils in a place where they are protected from
light.
– The Cavifil Injector can be cleaned with a customary
liquid disinfectant. It cannot be autoclaved.
Date information prepared:
09/2003

Ivoclar Vivadent AG
FL-9494 Schaan/Liechtenstein
This device has been developed solely for use in dentistry. Processing should be
done strictly according to the Instructions for Use. Liability cannot be carried out for
damage resulting from failure to observe the Instructions or the stipulated area of
application. The user is responsible for testing the device for its suitability and use
for any purpose not explicitly stated in the Instructions. Descriptions and data
constitute no warranty of attributes and are not binding.