Ordering Spare Parts; Packaging, Transport, Storage - Burkert 6213 EV Manuel D'utilisation

9. sparE parTs
Caution!
Risk of injury and/or damage by the use of incorrect
parts!
Incorrect accessories and unsuitable spare parts may
cause injuries and damage the device and the sur-
rounding area.
• Use original accessories and original spare parts from
Bürkert only.
9.1.

Ordering spare parts

Replacement part sets
When ordering replacement part sets, quote the sets
SET1, SET 3 or SET 7 and the identification number of the
device.
• See replacement part sets
part sets.
• The identification number of the device can be found
on the rating plate. See also chapter 6.3. Rating plate
description
English
24
10. packaging, TranspOrT,
sTOragE
note!
Transport damages!
Inadequately protected equipment may be damaged
during transport.
• During transportation protect the device against wet
and dirt in shock-resistant packaging.
• Avoid exceeding or dropping below the allowable
storage temperature.
Incorrect storage may damage the device.
• Store the device in a dry and dust-free location!
• Storage temperature. -40 – +80 °C.
English
26
9.2. Overview of replacement
9.2. Overview of replacement part
sets
Example
Plunger
tube set
SET 7
11. dispOsal
→
Dispose of the device and packaging in an environmen-
tally friendly manner.
note!
Damage to the environment caused by device com-
ponents contaminated with media.
• Observe applicable regulations on disposal and the
environment.
Note:
Observe national waste disposal regulations.
Type 6213 EV
Coil set
SET 1
Wearing-parts set
SET 3
English
25 25
English
27 27