Cleaning The Shaver - Panasonic ES-CV51 Mode D'emploi

Masquer les pouces Voir aussi pour ES-CV51:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 43
►Using the trimmer
1. Slide the trimmer handle up.
2. Press
and use.
Press and hold the top knob (a) and
slide the trimmer handle down to
lower the trimmer.
Tips for better usage
Apply the trimmer edge perpendicular to skin gently and move
downward slowly.
Trimming sideburns
ES-CV51_EU.indb
15
Pre‑shave of long beards

Cleaning the shaver

We recommend cleaning the shaver after each use.
Cleaning with water
• Turn the shaver off and disconnect the AC adaptor.
1
Apply some hand soap and some
water to the system outer foil
[A2]�
2
Press
for more than
2 seconds to activate the sonic
vibration cleaning mode�
• Splashing of foam is suppressed.
• The battery capacity lamps blink in order.
• After about 20 seconds, it will be
automatically turned off, or you can
turn it off by pressing the power switch.
3
Remove the outer foil section
[A9] and clean with running
water�
• See page 16 for attaching and
removing the outer foil section.
• Splashing is reduced by rinsing the shaver in sonic
vibration cleaning mode.
• After rinsing with water, shake the shaver up and down
for a few times to remove excess moisture and then wipe
off any drops of water with a dry cloth.
15
2017/08/04
19:57:12

Publicité

Table des Matières
loading

Table des Matières