CleaningTheShaver; ReplacingTheSystemOuterFoilAndTheInnerBlades - Panasonic ES‑LV61 Manuel D'utilisation

Clean

Cleaningtheshaver

We recommend that you clean your shaver with the sonic vibration
cleaning mode when the faucet symbol
panel.
1. Disconnect the power cord from the shaver.
. Apply some hand soap and some water to
the outer foil.
3. Rotate the lock ring to unlock the power
switch.
4. Press the power switch for more than 
seconds to activate the sonic vibration
cleaning mode.
•
appears on the LCD panel.
•
After about 0 seconds, it will be
automatically turned off, or you can turn it
off by pressing the power switch.
5. Remove the outer foil section and press the
power switch for more than  seconds to
activate the sonic vibration cleaning mode
and clean it with running water.
6. Wipe off any drops of water with a dry cloth.
7. Dry the outer foil section and the shaver
completely.
8. Attach the outer foil section to the shaver.
ES-LV61_US.indb 7

Replacingthesystemouterfoilandtheinnerblades

appears on the LCD panel once a year. (This will differ
depending on usage.) We recommend checking the system outer
foil and the inner blades when it appears.
appears on the LCD
Press the Power switch for more than 30 seconds to turn off
Replacingthesystemouterfoil

4
1. Press the foil frame release buttons and lift
the outer foil section upwards.
. Press the system outer foil release buttons
and pull down the system outer foil.
3. Align the foil frame mark (
system outer foil mark ( ) and securely
attach together.
5
•
The system outer foil cannot be reversely
attached.
• Always insert the system outer foil to the
foil frame when attaching to the shaver.
4. After turning the foil frame mark
(
outer foil section to the shaver until it clicks.
7
system outer foil once every year
inner blades once every two years
) and the
) to the front, securely attach the
.
1
2 3
7
2011/04/26 10:50:04