Symbols In This Document; Units Of Measurement; Safety; General Safety Instructions - Stiebel Eltron WPSB 308 E Manuel D'installation

CONTENTS | INSTALLATION
General information
installation
1. General information ������������������������ 10
1.1 Symbols in this document �������������������� 10
1.2 Units of measurement ����������������������� 10
2. Safety ������������������������������������ 10
2.1 General safety instructions �������������������� 10
2.2 Instructions, standards and regulations ��������� 10
2.3 Intended use ������������������������������� 10
3. Product description ������������������������� 11
3.1 Standard delivery ��������������������������� 11
3.2 WPSB 308 E, WPSB 312 E ���������������������� 11
3.3 WPSB 408 E �������������������������������� 11
4. Assembly ��������������������������������� 11
4.1 Brine assembly ����������������������������� 11
4.2 Circulation pump ��������������������������� 12
4.3 Installation information ���������������������� 12
5. Maintenance and inspection ����������������� 12
6. Specification ������������������������������� 12
6.1 Dimensions �������������������������������� 12
6.2 Connection example ������������������������ 13
6.3 Pump diagrams ����������������������������� 13
6.4 Data table ��������������������������������� 14
warranty
enVironment and recyclinG
10 |
INSTALLATION
1. General information
The chapter "Installation" is intended for qualified contractors.
1.1

symbols in this document

Note
General information is identified by the symbol shown
on the left.
f Read these texts carefully.
f
Symbol Meaning
Material damage
!
(appliance, consequential and environmental damage)
Appliance disposal
f This symbol indicates that you have to do something. The
f
action you need to take is described step by step.

1.2 units of measurement

Note
All measurements are given in mm unless stated oth-
erwise.

2. safety

Only a qualified contractor should carry out installation, com-
missioning, maintenance and repair of the appliance.
2.1

General safety instructions

We guarantee trouble-free function and operational reliability
only if the original accessories and spare parts intended for the
appliance are used.

2.2 instructions, standards and regulations

Note
Observe all applicable national and regional regula-
tions and instructions.

2.3 intended use

The brine assembly serves to circulate the brine in the geother-
mal collector or in the geothermal probe.
Any other use beyond that described shall be deemed inap-
propriate. Observation of these instructions and of instructions
for any accessories used is also part of the correct use of this
appliance.
WPSB