Safety Rules And Warnings; General - Alutech TR-3019-230E-ICU Manuel D'installation Et D'utilisation

SAFETY RULES AND WARNINGS

1. SAFETY RULES AND WARNINGS
1.1

GENERAL

Y
ATTENTION! This manual is the original installation and operation manual, and contains impor-
tant safety information. Prior to commencing installation study closely all the information pro-
vided below. Keep this manual for further reference. Store the manual carefully and provide the
user with free access to it at any time.
Y
ATTENTION! Mounting, connections, setup, commissioning, maintenance, repair, dismantling
and disposal of the product should be carried out by qualified specialists who underwent train-
ing (EN 12635) and relevant authorized companies. Follow the occupational safety and health
regulations provided by any active regulatory documents and this manual. Mounting, program-
ming, setup and operation in violation of the requirements provided by this manual are prohib-
ited, as this can cause losses and result in damage, injury and death.
Y
ATTENTION! During all operations, human safety is the highest priority!
Ensure the compliance with the requirements of international standards (EN 13241, EN 12604,
EN 12453) concerning the construction, mounting and operation of automated doors, as well
as other local rules and regulations. Drive usage with the doors shall be confirmed by testing.
Making any changes to any structural elements of the product or its unintended use is prohibit-
ed (see Section 2 'Product description'). The manufacturer is not liable for any damages, caused
by unauthorised changes in the product or its unintended use. The unintended use means us-
ing the product in the following conditions:
• private garages in residential areas;
• premises without additional entrance (e.g. separate entrance door or inbuilt wicket) that
allows people to enter or exit the premises in case of emergency;
• outdoors;
• on escape routes and emergency exits, smoke removal openings;
• in explosion and fire hazardous environment;
• in acid, salt, corrosive environment. The allowed operation environment is conditionally
clean or industrial environment.
When performing any operations (mounting, repair, electrical connections, maintenance, clean-
ing, etc.), power off the product. If the main switch or similar device is out of sight, attach a safe-
ty sigh stating: 'Do not turn on. People are working' and take measures preventing the possibil-
ity of accidental restoring of the power supply.
Follow the safety precautions when working with the product at height. Use rigid auxiliary equip-
ment, for example, a special elevating platform or scaffolding.
Do not start mounting and operation if you have any questions or something is not clear. Con-
tact the nearest service department or ALUTECH office, if needed.
The manufacturer as well as the Supplier does not provide supervision during product instal-
lation and does not bear the responsibility for the safety of product installation, operation and
maintenance.
Distribution of the manual and its copying, as well as usage or posting of information from
it without prior consent is prohibited. The manufacturer reserves the right to make chang-
es to this manual and product design without prior notice, but preserving the same func-
tional capabilities and designation. The contents of this manual cannot be used as the ba-
sis for any claims.
28 28
TR-3019-230E-ICU / TR-3019-400E-ICU