Installation; Safety; General Safety Instructions; Instructions, Standards And Regulations - Stiebel Eltron BHE 100 Style Utilisation Et Installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20

INSTALLATION

Safety

INSTALLATION
7.
Safety
Only a qualified contractor should carry out installation, commis-
sioning, maintenance and repair of the appliance.
7.1

General safety instructions

We guarantee trouble-free function and operational reliability only
if original accessories and spare parts intended for the appliance
are used.
7.2

Instructions, standards and regulations

Note
Observe all applicable national and regional regulations
and instructions.
8.

Appliance description

8.1

Standard delivery

The following are delivered with the appliance:
- Wall mounting bracket with fixing materials
- 2 bathrobe hooks
The appliance is delivered fully wired.
9.
Installation
Material losses
!
For integration into a DHW/central heating system, drain
the heat transfer medium supplied at the factory before
installing the appliance.
f To do this, remove the caps from the appliance's
f
flow and return connectors.
Due to the weak concentration, you can dispose of the
heat transfer medium in the domestic sewer system.
Note
If operated as a purely electrical appliance, carry out
installation without connecting the flow and return con-
nectors to the DHW / central heating system.
9.1

Installation site

Material losses
!
Observe the minimum clearances in chapter "Specifica-
tion".
Material losses
!
Fit the appliance to a vertical wall that is temperature-re-
sistant to at least 80 °C.
www.stiebel-eltron.com
Material losses
!
Never install the appliance directly below a wall socket.
Note
When integrating the appliance into a DHW / central heat-
ing system, choose the installation site subject to existing
on-site water connections.
9.2

Wall mounting

A 1599
B 400
C >320
f Drill the holes and insert rawl plugs.
f
1
5
1 Retainer screw
2 Wall sleeve
3 Lock screw
4 Retainer
5 Cap
f Secure the wall sleeves and the washers with screws.
f
f Fit the retainers to the rungs. Don't tighten the retainers yet.
f
A
B
2
3
4
BHE Style |
17

Publicité

Table des Matières
loading

Table des Matières