Télécharger Imprimer la page

Power Fist 8658973 Manuel De L'utilisateur page 14

Publicité

Les langues disponibles

Les langues disponibles

8658973
CARBURETOR ADJUSTMENT
Never make adjustments to the carburetor. The carburetor was set at the factory
to operate efficiently under most conditions. Only a qualified service technician
should adjust the carburetor if it is required.
MODIFYING THE CARBURETOR FOR HIGH ALTITUDES
At high altitudes, the standard air-fuel mixture is too rich, causing increased fuel
consumption and decreased performance. A rich mixture will also foul the spark
plug and cause hard starting.
A qualified technician can improve high altitude performance with certain
modifications. Have your carburetor modified if the engine will routinely be
operated at altitudes above 5,000 ft (1,500 m). Even with carburetor
modification, engine horsepower will decrease about 3.5% for each 1,000 ft
(305 m) increase in altitude. The effect of altitude on horsepower will be greater
than this is if no modification is made.
NOTICE! When the carburetor has been modified for high altitude operation, the
air fuel mixture will be too lean for low altitude use. Operation at altitudes
below 5,000 ft (1,500 m) may cause the engine to overheat and result in serious
engine damage. When using this engine at low altitudes, have a qualified
technician return the carburetor to original factory specifications.
CLEANING THE SEDIMENT CUP
CAUTION! Wear latex or rubber gloves when working on the sediment cup.
The cup may contain fuel that will cause skin irritation. Prolonged and
repeated exposure to fuel on skin may result in dry, cracked skin.
1.
Switch the fuel valve to the OFF position.
2.
Remove the fuel sediment cup, screw and O-ring.
3.
Clean the sediment cup with a non-flammable solvent or detergent and
rinse. Allow to dry.
a.
Some chemicals will damage the o-ring material. Check for
compatibility or simply replace the o-ring.
4.
Reassemble the sediment cup and o-ring.
5.
Switch the fuel valve to the ON position and check for leaks. Replace the
o-ring if the installation is correct, but fuel still leaks from the cup.
14
Gasoline Post Driver
For technical questions call 1-800-665-8685
V4.0

Publicité

loading