Introduction; Safety Instructions - Ayrton arcaline2 3G Mode D'emploi

Introduction

We would like to thank you for the trust you have placed in us
by choosing the AYRTON ARCALINE2 3G projector.
WARNING !
This product is not designed for household use.
You now own a professional multi-option luminaire. Before
using your luminaire, please ensure that your unit was not
damaged during transport. Should this be the case, do
not use this product and contact your AYRTON dealer
immediately.
For your own safety and that of others, please read this user
manual carefully before using this device for the first time.
Anyone involved in the installation, use or maintenance of
the ARCALINE2 3G must:
Be duly qualified and authorised to carry out this type
of work.
Follow the instructions in this user manual carefully.
Please take the time to read this manual in full before installing
and using your unit, in order to familiarise yourself thoroughly
with the user terms and all the information available on this
product.
Once you have familiarised yourself with this user manual, we
recommend that you keep a copy for further reference.
All the information contained in this user manual is subject to
change without prior notice.
AYRTON reserves the right to amend and improve any
aspect of the products in its range in the future, without the
obligation to integrate said modifications into any products
sold previously.

Safety instructions

Before installing and using the ARCALINE2 3G projector,
please read the safety instructions and precautions for use
outlined below carefully.
WARNING !
Risk of electric shock
Exercise caution when handling, this unit
requires high voltage, which may result in the
risk of electric shock.
Your ARCALINE2 3G projector has left our factories in perfect
working order. However, if you detect a fault, you are kindly
requested to contact your AYRTON dealer immediately
before using the device.
The manufacturer cannot be held liable for any damage
caused by non-compliance with safety, installation or
assembly instructions contained in this manual, or by any
modification to your unit.
Failure to comply with the safety, installation or assembly
instructions, or any modifications to the ARCALINE2 3G
projector shall lead to the warranty becoming null and void.
Check that the power supply voltage does not exceed
the maximum authorised voltage.
Check that your electrical installation is compliant with
the standards in force.
Your ARCALINE2 3G's connection requires the use
of the optional EASYBOX 3G connecting box and
hybrid power cables that are specifically designed and
marketed by AYRTON. You should use the original power
cables designed and produced by AYRTON with your
ARCALINE2 3G
Ensure that the cable(s) connected to your ARCALINE2
3G are not damaged by cuts, splices or crushing of any
type.
Handle the power cable with extreme caution if it is
connected to the mains.
Your ARCALINE2 3G complies with Class 1 safety
standards.
Make sure that the unit is properly connected to earth.
The ARCALINE2 3G earth connection involves earthing
the EASYBOX 3G power supply unit, which is required for
your projector to function properly.
Ensure that your ARCALINE2 3G is disconnected from
the mains before handling the projector.
The installation and electrical connection must be carried
out by an approved installer. AYRTON cannot accept any
liability in the event that the projector is installed by an
unqualified technician.
Never pull the power cable to unplug your ARCALINE2
3G! Unscrew the connector's locking ring from the power
cable until it is fully released, then gently pull on the
connector to unplug the cable.
Never connect or disconnect the power cable on your
ARCALINE2 3G with wet hands.
Never allow objects or liquids to enter into your
ARCALINE2 3G when installing the diffuser filters.
You notice odours given off by your ARCALINE2 3G
when it is started up for the first time. This is normal and
should become less noticeable after a few minutes of
use.
4 USER MANUAL