Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Compliance
UE (CEM) : EN 50081-1, EN 50082-1
UE (electrical safety) : EN 60598-1, 60598-2-17
Weight
7,9 Kg
Product codes
023640 : ARCALINE2 3G 10°x40° FULL COLOR Carbon
023610 : ARCALINE2 3G 10°x40° CTC Carbon
Accessories
075130U :
EASYBOX 3G connection box
077210U :
7-contact Hybrid cable
length 1 metre for units in the 3G series
077220U :
7-contcat Hybrid cable
length 2 metres for units in the 3G series
077250U :
7-contcat Hybrid cable
length 5 metres for units in the 3G series
077260U :
7-contcat Hybrid cable
length 10 metres for units in the 3G series
077270U :
7-contcat Hybrid cable
length 25 metres for units in the 3G series
077283U :
7 pin Male Y power data Adapter
077285U :
Adapter Y Mains/DMX to Female
7-contact hybrid connector for series 3G
025398U :
Sealing plug, DMX 120 Ohms (end of line)
for unites in the 3G series
077299U :
Simple sealing plug for hybrid output
connector (units in the 3G series)
Product care and
maintenance
The care and maintenance of your ARCALINE2 3G projector
must be carried out by a qualified person who is authorised
to perform this type of work. Your ARCALINE2 3G requires
regular maintenance, the frequency of which essentially
depends on the environment and the conditions of use.
Intensive use in a dusty environment or an environment with a
lack of air circulation around the device may lead to operational
breakdowns, which may in turn lead to overheating and
damage that is not covered by the warranty.
Cleaning
It is essential that you clean your ARCALINE2 3G on a regular
basis. In fact, dust and other residue that accumulates on the
body and glass of the device may reduce its light efficiency
and affect its operational performance.
that have accumulated on and between the cooling fins
located at the rear of the device's body
necessary, use a product designed for cleaning windows.
Monitoring
Your installation must be inspected on a regular basis by an
approved body. Furthermore, you must have the following
checked by a qualified person each year :
installed with no traces of corrosion.
free of any deformation or traces of corrosion.
cuts or splicing.
Updating the software
Your ARCALINE2 3G is designed to accommodate future
developments.
Its software can be updated and allows you to benefit from
the latest developments without having to open the unit.
This step requires the return of the device to your dealer, who
is the only one authorised to carry out this update.
USER MANUAL
17
WARNING!
Disconnect the power cable before
carrying out any work.
Disconnect the power cable from the mains supply.
Blow compressed air to clean off the dust particles
Clean the device glass with a moist cloth. Where
The projector fastening system must be correctly
The support on which the projector is installed must be
The mechanical parts must not show any signs of wear.
The electrical cables must not show any traces of wear,
Publicité
Table des Matières
