Colours; Frost, Diffusion; Dimmer, Strobe; Software Functions - Ayrton arcaline2 3G Mode D'emploi

Masquer les pouces Voir aussi pour arcaline2 3G:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Colours

Mixing system of Red, Green, Blue and White colours on the
FULL COLOUR model
Mixing system of Warm White and Cold White colours on
CTC model
14.2 billion colours on FULL COLOUR model
65536 nuances of white on the AWW model
Automatic colour variation variable speed effect on the FULL
COLOUR model
Colour temperature variation proportional channel on the
CTC model

Frost, diffusion

Optional 13° diffuser filter available (spot-like light beam)
Optional 33°x13° horizontal diffuser filter available (elliptic light
beam)

Dimmer, strobe

Electronic dimmer switch for the perfect light adjustment from
0 to 100% without colour variation
White or colour strobe effect with speed adjustment from 1 to
25 flashes per second

Software functions

DMX addressing of the projector and its optional parameters
through the standard DMX RDM controller
Integrated hourly counter, information available through
standard DMX RDM controller
Temperature display, information available through standard
DMX RDM controller

Control

Control of the device through DMX 512 protocol
DMX 512 Input / Output via watertight hybrid connectors with
7 contacts
Choice of 4, 5, 7, 8, 9 or 11 DMX 512 circuits on FULL
COLOUR model, parameters can be set through a standard
RDM DMX controller
Choice of 2, 3, 5, 4, 5 or 7 DMX 512 circuits on CTC model,
parameters can be set through a standard RDM DMX
controller

Power supply

Electronic supply with PFC active
110 to 240 Volts – 50-60Hz
Power 100 Watts
Leakage current generated by the device: 0.8 mA
Power supply input/output through watertight hybrid
connecters with 7 contacts

Cooling system

Natural convection, with parameter control thermal adjustment
Protection against temperatures excesses
Free air circulation around the unit must be guaranteed, do
not enclose the unit

Construction

Body in extruded aluminium
Front glass in tempered glass
End shields in moulded aluminium fitted with a cable gland
External hardware in stainless steel (black finish)
1 adjustable bracket at each end of the unit, for connection
to a floor stand (included)
2 floor stands come included with the unit
Removable internal slider channel support the electronics
and light sources
IP65 protection index
Exterior finish : black (Carbon)

Installation

2 adjustable brackets, designed to connect to clamps (not
included), or floor stands (included)
2 stands supplied with the unit

Parameters for use

Operating positions : all
(device on floor or fixed to a support)
Maximum permitted ambient temperature (aT max) :
40°C (104°F)
Minimum permitted ambient temperature (aT min) :
-5°C (23°F)
Minimum usage distance : 0,2m (8 inches)
Do not enclose the unit, allow free air circulation on all sides
16
USER MANUAL

Publicité

Table des Matières
loading

Table des Matières