Introduction; Description Of The Device; Overview; Safety Instructions - Ayrton icecolor 500 Mode D'emploi

Thank you for your patronage. We are confident that our
excellent products and service can satisfy you. For your own
safety, please read this user manual carefully before installing
the device.
In order to install, operate, and maintain the lighting safety and
correctly. We suggest that the installation and operation should
be done by the verified technician and follow the instruction
strictly.
CAUTION !
Unplug mains lead before opening the housing.
Every person involved with the installation, operation and
maintenance of this device has to:
be qualified
follow carefully the instructions of this manual

Introduction

Thank you for having chosen this professional LED Color
Changer projector.
You will see you have acquired a powerful and versatile device.
Unpack the device. Inside the box you should find :
1. Two omega clamps
2. One safety rope
3. Manual
4. Câble d'adaptation pour alimentation secteur
5. 2 câcles d'adaptation DMX XLR 5 broches
Please check carefully that there is no damage caused by
transportation. Should there be any, consult your dealer and
don't install this device.

Description of the device

40 x 10W high power four-colors LEDs (Red / Green / Blue
/ White)
9 DMX Channel modes: 4, 5, 12, 8, 9, 16, 16, 17, 24 DMX
channels selectable for numerous applications
Strobe-effect with 1 to 25 flashes per second
General dimming and blackout for all four effect
Excellent RGBW mixing and rainbow effect
Control board with full color LCD graphic display and touch-
keyboard
Rechargeable back-up Battery for Display, no need external
power supply, enable users to enter display menu for address
setting or access other functions setting.
Wireless receiver pre-installed

Overview

1
6
7
8
1. Lens
2. Led Matrix 1
3. Led Matrix 2
4. Led Matrix 3
5. Led Matrix 4
6. Carrying Handle
7. Locking Handle
8. Power Input

Safety instructions

CAUTION !
Be careful with your operations. With a dangerous
voltage you can suffer a dangerous electric shock
when touching wires.
This device has left the factory in perfect condition. In order
to maintain this condition and to ensure a safe operation, it is
absolutely necessary for the user to follow the safety instructions
and warning notes written in this user manual.
Important :
Damages caused by the disregard of this user manual are not
subject to warranty. The dealer will not accept liability for any
resulting defects or problems.
If the device has been exposed to temperature changes due
to environmental changes, do not switch it on immediately.
The arising condensation could damage the device. Leave the
USER MANUAL
4
2
3
4
5
10
12
9
13
14
11
15 16
9. Display
10. Left-button
11. Down-button
12. Up-button
13. Right-button
14. Menu-button
15. DMX Input
16. DMX Output