Disposing Of The Product - Grundfos CU 301 Notice D'installation Et De Fonctionnement

Factory settings
Alarm
0.7 kW
1)
Overvoltage 280 VAC
Speed reduction:
198 V
Undervoltage
Stop limit: 150 V
Dry-running 300 W
2)
stop 550 W
Dry-running
"Active" (Grundfos GO Remote setting). See section
protection
Speed
In connection with undervoltage or overload
reduction
Stop limit: 60 °C
Electronics
temperature
Restart: 50 °C
Overload 5.2 A
Sensor alarm "No sensor used" (Grundfos GO Remote setting). See section
1) 200-240 V motors: Operation is guaranteed up to 280 VAC.
100-115 V motors: Operation is guaranteed up to 150 VAC.
In order to avoid unnecessary stops, the overvoltage stop limit is as stated.
2) Applies only to SQ/SQE 2-55.
Accuracy of Grundfos GO Remote readings
Display
Actual pressure
Speed
Temperature
Power input and power consumption
Sensor
The sensor signal accuracy depends on the sensor
type. See the sensor specifications in question.

9. Disposing of the product

This product or parts of it must be disposed of in an
environmentally sound way:
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest
Grundfos company or service workshop.
The crossed-out wheelie bin symbol on
a product means that it must be
disposed of separately from household
waste. When a product marked with this
symbol reaches its end of life, take it to a
collection point designated by the local
waste disposal authorities. The separate collection
and recycling of such products will help protect the
environment and human health.
200-240 V motors
1.15 kW 1.55 kW
280 VAC 280 VAC
Speed reduction: Speed reduction:
198 V 207 V
Stop limit: 150 V Stop limit: 150 V
680 W 800 W
Stop limit: 65 °C Stop limit: 65 °C
Restart: 55 °C Restart: 55 °C
8.4 A 11 A
Accuracy
± 0.1 bar
± 1 %
± 5 %
± 5 %
100-115 V
motors
1.85 kW 0.7 kW
280 VAC 150 VAC
Speed reduction: Speed
207 V reduction: 90 V
Stop limit: 150 V Stop limit: 75 V
900 W 300 W
4.7 Dry-running protection.
Stop limit: 70 °C Stop limit: 70 °C
Restart: 60 °C Restart: 60 °C
12 A 12 A
5.3.3 Analog input 1.
25