Types Of Machines Manageable - AERMEC GLFI10M Manuel D'utilisation

TYPES OF MACHINES MANAGEABLE

The new GLF (cod. 3794000) control system was created with the key objective in mind of controlling the flaps via a stepper motor,
but can also manage the various FCL/FCLi series cassettes. The machines this control system can manage are depicted. Below you
will find the 4 configurations possible.
2-pipe fan coil system with water probe (optional) upstream/downstream of the valve
SA
4-pipe fan coil system with hot water probe (optional) upstream/downstream of the valve
SA
SWH
2-pipe fan coil system with supplementary/replacement heater and
optional water probe
RE
SA
SR
22
AGLFI10NFJ 2006_5905245_01
Y1
SW
Y2
Y1
SWC
Y1
SW
SA
SW
SR
Y1
Y2
FAN
RE
SA
SA
4-pipe fan coil system with supplementary heater and hot water
probe (optional) upstream of valve only
SA
RE
SR
Key
Water probe (if present)
hot water solenoid valve (4 pipes)
fan with asynchronous or inverter motor
heater (supplementary/replacement)
Y1
SW
Y2
SWH
Y1
SWC
Y2
SWH
Y1
ambient probe
heater probe
solenoid valve
SWC