Control Card Inputs/Outputs; Using The Dip-Switch Settings System - AERMEC GLFI10M Manuel D'utilisation

CONTROL CARD INPUTS/OUTPUTS

I/O
M2 L:
M1 N:
M3
M4
M5
M6
M7
M8
M9
M10
M11
M12
M13
M14
M26
M22
CN2
CN1
CN3
M15, M16
M17
M18
M19
M20
M21
M25
M27,M28

USING THE DIP-SWITCH SETTINGS SYSTEM

The board has specific configuration dip-switches for the possible installations. There are 8 microswitches are and they have the following
functions:
24
AGLFI10NFJ 2006_5905245_01
Function
Power supply input to the card
Power supply input to the card
GND: ground reference
AUX/RE: output for the electric heater command
Neutral reference for the AUX/RE and MA output
MA: output for the fin motor command
Y2: output for the water valve command
Y1: output for the water valve command
Neutral reference for the Y1, Y2 output
Neutral reference for the V1, V2, V3 output
V3: maximum speed output
V2: average speed output
V1: minimum speed output
back-up input, not connected
Service control board
Control board for connection to receiver
SW: water probe
SA: air probe
SC: auxiliary water probe
SR: electric heater temperature probe
Out 0-10V: reference for inverter
GND of inverter reference
Out 0-10V
Out 0-10V
Input for fault inverter reading
Expansion connector
CC: Condensate discharge motor fault input
Voltage: 230V AC, current 10 A
Voltage: 230V AC, current 10 A
Voltage: 230V AC, current 10 A
Voltage: 230V AC, current 7 A
Voltage: 230V AC, current 5 A
Voltage: 230V AC, current 5 A
Voltage: 230V AC, current 5 A
Voltage: 230V AC, current 10 A
Voltage: 230V AC, current 10 A
Voltage: 230V AC, current 5 A
Voltage: 230V AC, current 5 A
Voltage: 230V AC, current 5 A
Voltage: 10 DC, current 10 mA
Voltage: 10 DC, current 10 mA
Voltage: 10 DC, current 10 mA
Voltage: 10 DC, current 10 mA
Voltage: 10 DC, current 10 mA
Voltage: 5 DC, current 0.5 mA
Heater control type (integration / replacement)
Dead band
Presence of a heater accessory
2/4-pipe machine
Regulator band
Ventilation type
Probe position
Presence of a valve
Electrical characteristics
//
//
See figure
//
NTC 10Kohm
NTC 10Kohm
NTC 10Kohm
NTC 4Kohm 200°C
//