CHAP. 1 GENERAL INFORMATION
Our pressurisation groups are manufactured for pumping clean water.
They must be installed in places protected from bad weather and ice, well ventilated and in non-dangerous
environment.
Each of our groups is entirely tested in our establishments.
Upon delivery, check that the group has not suffered any damage during transportation; in this case,
contact immediately the retailer. In case of claims, contact immediately the retailer within eight days
of purchase.
CHAP. 2 LIMITS OF USE
WARNINGS
WARNINGS
MAXIMUM TEMPERATURE OF THE LIQUID PUMPED
MAXIMUM/MINIMUM AMBIENT TEMPERATURE
The group is not suitable for pumping chemically aggressive or
inflammable liquids.
Avoid any dry-operating of the motor pump.
40°C
40°C
17