AMATECH F-YFES Instructions D'utilisation page 13

INSTRUCTIONS FOR USE
d. Insert blade on the Stirrups mount into rail Clamp.
e. Once the stirrup is placed in the rail clamp, tighten handle securely.
WARNING: The handle must be tightened securely before use.
To pre-position stirrup boots, loosen boot-locking mechanism and slide boot
f.
along rod until top end (calf portion) of boot is located approximately at
patient's mid calf. Tighten Boot Locking Mechanism securely. Repeat above
procedure for the other stirrup.
g. Position stirrups to be level with the table by squeezing the release handle
and moving stirrup downward.
Positioning Patient in Stirrups
h. Ensure the patient is positioned on O.R. table in accordance with procedure
and surgeon requirements.
Pre-position stirrup boots. Loosen boot-clamping mechanism and slide boot
i.
along rod until top end (calf portion) of boot is approximately at patient's
mid-calf. Tighten clamp.
NOTE: For larger patients, a padded arm shield can be used to protect the
wrist, hand and arm.
Document Number: 80024507
Version: B
Page 13
Issue Date: 18 MAR 2020
Ref Blank Template: 80025118 Ver. E