Configuring The Function Notification Tone Settings - Renkforce 1582597 Notice D'emploi

q) Configuring the function notification tone settings
This setting does not affect the relay notification tone. To change the relay notification tone
settings, see section p) "Setting the relay activation tone".
83 + 0 + # = Disable notification tones
3 2 8 9
*
8 3
0 #
*
When you use the master code to enter programming mode, notification tones are
enabled for the duration of the programming (to confirm a keypad entry).
When you enter a user code in either entry mode (automatic or manual), the code lock
will beep when the door opens (the yellow and green LED will turn on briefly), even if
notification tones are disabled.
83 + 1 + # = Enable notification tones
3 2 8 9
*
8 3
1 #
*
Enter the master code (in this example, the master code is "3289")
to enable programming mode, and then press the * key. The code lock
will beep twice and the yellow LED will stay constant to indicate that
programming mode is enabled.
Enter the memory code "83", and then press the disable code ("0").
Press the # key to confirm your entry.
The code lock will beep twice to indicate that notification tones have been
disabled. The yellow LED will flash twice.
Press the * key to exit programming mode. The yellow LED will start to
flash again. Notification tones are now disabled. This setting is useful in
quiet office environments.
Enter the master code (in this example, the master code is "3289")
to enable programming mode, and then press the * key. The code lock
will beep twice and the yellow LED will stay constant to indicate that
programming mode is enabled.
Enter the memory code "83", and then press the activation code ("1").
Press the # key to confirm your entry.
The code lock will beep twice, indicating that notification tones are enabled.
The yellow LED will flash twice.
Press the * key to exit programming mode. The yellow LED will start to
flash again. Notification tones are now enabled (e.g. when you touch the
keypad).
71