Status Display - Lenze L-force EMF2113IB Instructions De Montage

Status display

LED
Pos. Colour
0
green
1
yellow
2
red /
green
EDKMF2113 DE/EN/FR 5.1
Condition
Description
on Communication module is supplied with voltage and is
connected to the basic device.
off Communication module is not supplied with voltage. Basic device
or external voltage supply is switched off.
blinking Communication module is supplied with voltage, but is (still) not
connected to the basic device because
l
the communication module has not been correctly attached
to the basic device
l
it is not yet possible to transfer data from/to the basic device
(e.g. basic device in the initialisation phase).
on Communication module is being initialised,
inactive INTERBUS communication of the master
off Communication module is not yet initialised.
blinking Active INTERBUS communication
l
SLOW (1 Hz): process data and PCP communication
l
FAST (4 Hz): only process data
l
VERY FAST (8 Hz)
– Indicates impermissible settings:
– The communication module continues internally with the
Red and green drive LEDs indicate the operating status of the
82XX, 8200 vector, 93XX, Servo PLC 9300 and Drive PLC basic
device (see Operating Instructions for the basic device)
Data word sum: PD + PCP > 10 or number of process data
words: PD = 0.
following values: PD = 2 and PCP = 1
l
Commissioning
Status display
5
69