Disconnecting From The Pc; Status Messages For The Keypad - Lenze EPM-H510 Instructions De Mise En Service

Show/Hide Bookmarks
Commissioning
4.2.3

Disconnecting from the PC

1. Switch off the PC.
2. Switch off the supply voltage for the keypad.
3. Remove the EPZ-H110 download cable from the keypad and the PC.
4. Switch on the supply voltage for the keypad.
The keypad is now ready for operation.
4.3

Status messages for the keypad

The keypad status can be queried any time. Information can be obtained about
the interface (port)
!
the name of the loaded driver
!
the version of the loaded driver (Ver)
!
mains address of the keypad (Addr VT)
!
the last error
!
If you want to ...
A) query the status of the keypad. For this,
touch the display in the
•
&
top right and bottom left
•
(
top left and bottom right
The corner to be touched first must not
contain a field for a selctable object.
B) close the status message.
60
Press keys ...
'
or
)
corners.
ESC
EDBEPM-H510 DE/EN/FR 4.0
Example
2
1
Port Port Port Port Port : NET : NET : NET : NET : NET
Driver : CAN Lenze M Driver : CAN Lenze M Driver : CAN Lenze M Driver : CAN Lenze M Driver : CAN Lenze M
Ver Ver Ver Ver Ver : 1.06 : 1.06 : 1.06 : 1.06 : 1.06
Addr Addr Addr Addr Addr : NO ADDRESS : NO ADDRESS : NO ADDRESS : NO ADDRESS : NO ADDRESS
Error Error Error Error Error : RESET : RESET : RESET : RESET : RESET
L
0
3
PROG PROG PROG PROG PROG
TRAN TRAN TRAN TRAN TRAN
PAGE PAGE PAGE PAGE PAGE
ESC ESC ESC ESC ESC