Mechanical Installation - Lenze L-force EMF2113IB Instructions De Montage

3

Mechanical installation

Fig. 1 Attaching the communication module
ƒ Plug the communication module onto the standard device (here: 8200 vector).
ƒ Tighten the communication module to the standard device using the fixing screw in
order to ensure a good PE connection.
)
Note!
For the internal supply of the communication module by the 8200 vector
frequency inverter the jumper has to be adjusted within the interface opening
(see illustration above).
Observe the notes (^ 51).
EDKMF2113 DE/EN/FR 5.1
Mechanical installation
l
3
2102LEC014
47