Diagnostics; Led Status Displays - Lenze CANopen EMF2178IB Instructions De Montage

9

Diagnostics

LED status displays

9 Diagnostics
LED status displays
0
EMF2178IB
Address Bd
6
L
CANopen
5
Pos. Status display (LED)
0
Connection status to standard device, two−colour LED (green/red)
OFF
GREEN
Blinking
Constantly ON
RED
Constantly ON
Blinking
78
1
2
3
4
2178
Description
l
The communication module is not supplied with voltage.
l
The external voltage supply is switched off.
The communication module is supplied with voltage, but has
no connection to the standard device.
Cause:
The standard device is ...
l
switched off;
l
in the initialisation phase;
l
not available.
The communication module is supplied with voltage and is
connected to the standard device.
CANopen operation impossible.
Permanently:
l
Parameters are reset to Lenze setting.
l
CANopen operation possible.
1 x blinking:
l
An error occurred while saving a value.
2 x blinking:
l
CANopen operation possible.
l
The node address/baud rate from C1850/C2350 or
C1851/C2351 could not be accepted .
l
2178CAN003
EDKMF2178IB DE/EN/FR 6.1