Güde 320/25 Li-Ion Traduction Du Mode D'emploi D'origine page 24

ENGLISH
20
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct po-
wer tool for your application. The correct power
tool will do the job better and safer at the rate for
which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such pre-
ventive safety measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of the reach of child-
ren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
e) Treat electric tools carefully. Check whether the
moving parts work perfectly and do not drag,
whether not broken or damaged to such an
extent that functioning of electric tools could
be affected. Have any damaged parts repaired
before using the machine. Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
5) Using and treatment of cordless tools.
a) Charge the batteries only in chargers recom-
mended by the manufacturer. Risk of fire for a
charger suitable only for a certain type of batteries
or, as appropriate, accumulators, if used for other
accumulators.
b) Use only such accumulators in this electric
appliance that have been designed for this
appliance. Use of other accumulators may lead to
injuries and risk of fire.
c) Do not leave an accumulator not being used
near office clips, coins, keys, nails, screws
or other small metal items that could cause
contact bridging. Short circuit between accumu-
lator contacts may result in burns or fire.
d) Liquid may leak from an accumulator if used
improperly. Prevent contact with such liquid.
Rinse an affected body part with water in case
of accidental contact. If liquid gets to your eye,
seek medical advice.Liquid leaking from a battery
may cause skin irritation or burns.
6) Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
Safety instructions for Cordless lawn
mower
Keep children and other persons including animals in a
safe distance when using the appliance. Minimum safe
distance is 5 m.
Wear personal protective equipment. Wear solid shoes
and long trousers. Never use the appliance when
barefooted or in light sandals. Wear protective gloves if
necessary.
Carefully check the terrain where the appliance is going
to be used and remove all objects that could get caught
or thrown off by the appliance such as stones, branches,
wires, animals, etc.
Avoid operating the equipment in wet grass, where
feasible;
Before using, always visually inspect to see that
the blades, blade bolts and cutter assembly are not
blunt, worn or damaged. Replace worn or damaged
blades and bolts in sets to preserve balance;
The protective equipment on the appliance is
strictly prohibited to be disassembled, changed,
used in conflict with the designation and it is
prohibited to attach any protective equipment of
other manufacturers.
The appliance must not be used if damaged or
safety equipment is defective. Replace any worn-out
and damaged parts.
Do not start the engine before your feet are in a safe
distance from the cutting tools.
Do not incline the appliance when being started.
Do not start the appliance when you are standing in
front of the ejection opening.
Walk! Never run!
Make sure your posture is safe, especially on slopes. Do
not cut on too steep slopes. Be particularly careful when
changing travelling direction on slopes.
Pay maximum attention when turning around and
pulling the appliance to you.
Switch the mower off whenever carrying or inclining it
or when being outside a grass area. Wait until all rotating
parts have stopped.
If an undesirable item is encountered or the appliance
starts vibrating, the appliance must be switched off and
the socket plug removed. Check whether the appliance
is not damaged. Repair any damage.
Switch the appliance immediately off after finishing
your work.
• Stop the machine and take out the contact key. Wait
until all rotating parts have stopped and the unit has
cooled down. Take out the key.whenever you leave