Table des Matières
Publicité
6.5
Lubrication Schedule
LUBRICANT
Grease,
See Table 2-2
6.6
Schedule for Other Maintenance
1. TABLETOP
1.1 Remove pads, and then look for wear and tear on the pads and
on the fastening strips of pads and tabletop.
1.2 Examine all side-rail hardware attachments.
1.3 Check and tighten screws on side rails.
1.4 Remove and clean cassette top of each table section.
2. HYDRAULIC SYSTEM
2.1 Clean fluid filters.
2.2 Check the cleanness of hydraulic oil. Replace it if necessary.
2.3 Check hydraulic fluid level.
2.4 Inspect floor directly beneath the table and all the hoses, fittings
and components of hydraulic system for leakage.
3. ELECTRICAL CHECKS
3.1 Check for loose circuit board connectors and cable plugs.
3.2 Check for damage or fraying cables.
3.3 Inspect electrical cord and Hand Pendant cable.
3.4 Electrically conductive properties of floor locks
TABLE SECTION
Articulation pins – Leg Section
Articulation pins – Tabletop Tilting
Articulation pins – Back Section
Articulation pins – Seat Section
Central column – Tabletop up/down
Floor locks
ITEMS
6-6
B2AV800 Series Surgical Table
IM-B2AV800-E01
MINIMUM FREQUENCY
2 x per year
MINIMUM FREQUENCY
4× per year
1× per year
1× per year
4× per year
Publicité
Table des Matières
