Mounting - Camille Bauer KINAX WT 711 Mode D'emploi

Regulations
Test voltage: 500 Veff, 50 Hz, 1 min.
all electrical connections against
housing
Housing protection: IP 43 acc. to EN 60 529
without gear
IP 64 with gear or other similar

mounting

Environmental conditions
Climatic rating: Standard version
Temperature – 25 to + 70 °C
Annual mean relative
humidity ≤ 75%
or
6. Mounting
The relationship between the types of mounting, the corresponding cut-out diagrams and the different versions of the trans-
mitter can be seen from Table 1:
Table 1
Transmitter
version
... directly
... with clamps
... with
The M3 screws are needed for the "directly" mounted versions and two M6 nuts and bolts for those "with a bracket". The
screws, respectively nuts and bolts are not supplied, because the required length varies according to the thickness of the
mounting surface.
mounting foot
Transportation and
storage temperature:
Drilling and cut-out diagrams
for mounting transmitters ...
5
M3
Ø6,8
80 ±0,2
95
Version with improved climatic
rating
Temperature – 25 to + 70 °C
Annual mean relative
humidity ≤ 95%
Ex version
see enclosed Ex-type-examination
Certifi cate
– 25 to 80 °C
3,2
M4
80
15